Home Page | Product Range | Price List | 1485 Series
1485 Series | Type 12 Lay-In Wireway
Wireway and Accessories
Purchase Product Product Data Sheet Customisation Options

Product Application
  • Designed to enclose and protect electrical wiring from dirt, dust, oil and water.
  • All sections and fittings are completely open on each side to allow wires and cables to be placed into the wireway without "pulling through".
Product Construction
  • Bodies and covers are formed from 14-gauge steel with 10-gauge steel flanges.
  • Flanges are open at the top to allow cables to lay in when doors open.
  • 12" x 6" has a 12-gauge steel body with a 14-gauge cover.
  • Smooth continuously welded seams.
  • Interior surfaces are smooth to prevent wire damage during installation.
  • Butt hinged cover is secured with easily operated quick release clamps.
  • Oil resistant gaskets are permanently secured.
  • Solid oil resistant gaskets are used between flanges when sections and fittings are bolted together.
  • One gasket kit, complete with hardware is provided with each straight section or fitting.
  • Sealing plate is included.
  • Flange junctions are sealed with gasket sealing plates, which are put in place after wiring is completed. One is supplied with all straight sections and most fittings; see table for exact number.
Product Finish
  • Sections and components are finished in ANSI 61 grey powder coating.
Product Notes
  • When joining a wireway section or fitting to an enclosure be sure to order a box connector.
  • When joining two wireway sections, or joining a wireway section to a fitting, a flat sealing plate is required at each junction; necessary kits are supplied with each section and fitting. See table, extra kits may be ordered if necessary.
  • When joining a lay-in wireway section or fitting to a closure plate, a box connector, or cut-off fitting, an angle sealing plate is required at each junction.
  • Necessary kits are supplied with each section and fitting. Extra kits, although not normally required, are necessary when joining lay-in wireway to a non-lay-in section or fitting section.
Product Standards
  • UL 870 type 1 (unless marked).
  • CSA Type 1 (unless marked).
  • Complies with:
    • NEMA type 12.
    • IEC 60529 and IP54.
Hammond Manufacturing Electrical Enclosures
KGA Enclosures Ltd are fully authorised distributors of the Hammond Manufacturing Electrical Enclosures product range. This entire range is available from KGA Enclosures Ltd at great competitive pricing and with full customisation options on all applicable products.

Please remember - KGA Enclosures Ltd are authorised distributors of this product range. Please only use authorised distributors to purchase these products. This will then ensure you receive a genuine product.
Hammond Manufacturing Product Ranges
Did you know, you can find the entire Hammond Manufacturing product range, here at KGA Enclosures Ltd.
Share This Product Range
Share Range on Facebook Share Range on LinkedIn Share Range on X
1485 Series | Hammond Manufacturing Electrical Enclosures | KGA Enclosures Ltd
Product Options
Please click here for all ordering, pricing confirmation and lead times.
Part No Brand Product Information 1+ 5+ 10+ 25+
2.5" x 2.5"
1485B12 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485B120 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485B24 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485B36 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485B48 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485B6 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485B60 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
4" x 4"
1485C12 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485C120 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485C24 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485C36 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485C48 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485C6 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485C60 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
6" x 6"
1485D12 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485D120 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485D24 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485D36 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485D48 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485D6 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485D60 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
8" x 8"
1485E12 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485E120 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485E24 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485E36 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485E48 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485E6 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485E60 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
12" x 6"
1485F12 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485F120 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485F24 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485F36 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485F48 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485F6 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485F60 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
For product compatibility and more information, please see the product data sheet.
45-Degrees Elbow Inside Opening
Part No Brand Product Information 1+ 5+ 10+ 25+
1485B4P Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485C4P Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485D4P Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485E4P Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
For product compatibility and more information, please see the product data sheet.
45-Degrees Elbow Outside Opening
Part No Brand Product Information 1+ 5+ 10+ 25+
1485B4Q Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485C4Q Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485D4Q Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485E4Q Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
For product compatibility and more information, please see the product data sheet.
45-Degrees Elbow Top Opening
Part No Brand Product Information 1+ 5+ 10+ 25+
1485B4N Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485C4N Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485D4N Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485E4N Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485F4N Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
For product compatibility and more information, please see the product data sheet.
60" Long Partition (Barrier)
Part No Brand Product Information 1+ 5+ 10+ 25+
1487CB60 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1487DB60 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1487EB60 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
For product compatibility and more information, please see the product data sheet.
90-Degrees Elbow Inside Opening
Part No Brand Product Information 1+ 5+ 10+ 25+
1485B9P Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485C9P Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485D9P Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485E9P Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485F9P Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
For product compatibility and more information, please see the product data sheet.
90-Degrees Elbow Outside Opening
Part No Brand Product Information 1+ 5+ 10+ 25+
1485B9Q Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485C9Q Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485D9Q Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485E9Q Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485F9Q Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
For product compatibility and more information, please see the product data sheet.
90-Degrees Elbow Top Opening
Part No Brand Product Information 1+ 5+ 10+ 25+
1485B9N Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485C9N Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485D9N Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485E9N Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485F9N Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
For product compatibility and more information, please see the product data sheet.
12" Transposition
Part No Brand Product Information 1+ 5+ 10+ 25+
Clockwise
1485BZ12 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485CZ12 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485DZ12 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485EZ12 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
Counter-Clockwise
1485BZC12 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485CZC12 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485DZC12 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485EZC12 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
For product compatibility and more information, please see the product data sheet.
Adjustable Fitting
Part No Brand Product Information 1+ 5+ 10+ 25+
1485BX Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485CX Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485DX Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485EX Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485FX Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
For product compatibility and more information, please see the product data sheet.
Angle Sealing Plate
Part No Brand Product Information 1+ 5+ 10+ 25+
1485BS9 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485CS9 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485DS9 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485ES9 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485FS9 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
For product compatibility and more information, please see the product data sheet.
Box Connector
Part No Brand Product Information 1+ 5+ 10+ 25+
1485BK Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485CK Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485DK Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485EK Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485FK Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
For product compatibility and more information, please see the product data sheet.
Box Entry Swivel Nipples
Part No Brand Product Information 1+ 5+ 10+ 25+
1485BV1 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485CV1 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485DV1 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485EV1 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
For product compatibility and more information, please see the product data sheet.
Bracket Hanger
Part No Brand Product Information 1+ 5+ 10+ 25+
1485BL2 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485CL2 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485DL2 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485EL2 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
For product compatibility and more information, please see the product data sheet.
Cover Plate
Part No Brand Product Information 1+ 5+ 10+ 25+
1485BH Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485CH Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485DH Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485EH Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485FH Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
For product compatibility and more information, please see the product data sheet.
Cross Fitting
Part No Brand Product Information 1+ 5+ 10+ 25+
1485BY Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485CY Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485DY Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485EY Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485FY Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
For product compatibility and more information, please see the product data sheet.
Cut-Off Fitting Lay-In
Part No Brand Product Information 1+ 5+ 10+ 25+
1485BW1 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485CW1 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485DW1 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485EW1 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485FW1 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
For product compatibility and more information, please see the product data sheet.
Cut-Off Fitting Non Lay-In
Part No Brand Product Information 1+ 5+ 10+ 25+
1485BW2 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485CW2 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485DW2 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485EW2 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485FW2 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
For product compatibility and more information, please see the product data sheet.
Drop Hanger
Part No Brand Product Information 1+ 5+ 10+ 25+
1485BL1 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485CL1 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485DL1 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485EL1 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
For product compatibility and more information, please see the product data sheet.
Flexible Fitting
Part No Brand Product Information 1+ 5+ 10+ 25+
1485BFF Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485CFF Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485DFF Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485EFF Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
For product compatibility and more information, please see the product data sheet.
Junction Box
Part No Brand Product Information 1+ 5+ 10+ 25+
1485BJ Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485CJ Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485DJ Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485EJ Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
For product compatibility and more information, please see the product data sheet.
Nipples
Part No Brand Product Information 1+ 5+ 10+ 25+
1" Nipple
1485BM1 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485CM1 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485DM1 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
2" Nipple
1485BM2 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485CM2 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485DM2 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
3" Nipple
1485BM3 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485CM3 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485DM3 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
For product compatibility and more information, please see the product data sheet.
Reducers
Part No Brand Product Information 1+ 5+ 10+ 25+
1485CRE Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485DRE Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485ERE Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485FREC Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485FRED Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
For product compatibility and more information, please see the product data sheet.
Snap On Flat Sealing Plate
Part No Brand Product Information 1+ 5+ 10+ 25+
1485BSM Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485CSM Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485DSM Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485ESM Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485FSM Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
For product compatibility and more information, please see the product data sheet.
Standard Swivel Nipples
Part No Brand Product Information 1+ 5+ 10+ 25+
1485BV2 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485CV2 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485DV2 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485EV2 Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
For product compatibility and more information, please see the product data sheet.
Tee Fitting Outside and Top Opening
Part No Brand Product Information 1+ 5+ 10+ 25+
1485BTQ Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485CTQ Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485DTQ Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485ETQ Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
For product compatibility and more information, please see the product data sheet.
Tee Fitting Top Opening
Part No Brand Product Information 1+ 5+ 10+ 25+
1485BTN Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485CTN Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485DTN Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485ETN Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
1485FTN Hammond Click part number for more details P.O.A. P.O.A. P.O.A. P.O.A.
For product compatibility and more information, please see the product data sheet.

1485 Series | Wireway and Trough | Hammond Manufacturing Electrical Enclosures | KGA Enclosures Ltd

Hammond Manufacturing Customisation Services
Product Customisation Options
What makes KGA Enclosures Ltd different from most other larger distributors is that we can offer full customisation services on all enclosures and accessories. All customisation work is undertaken by the relevant supplier, (some smaller production runs are done by utilizing an outside contractor) at their own manufacturing facilities. These services include milling or punching holes and slots into the enclosure or end plates for cables, connectors, switches, etc. Printing and silk-screening services all for the addition of text, logos, and graphics onto both the enclosure and end plates, to allow the end user to easily identify the product, and to allow the final product to look more elegant. Contact us today to see how we can assist you.
Modified Electronic Enclosures
Almost every enclosure will need some kind of modification to be useful. In house, modifications can be tedious, over-complicated, and a distraction from your core business. A third party shop can add time and expense. Let us help you by delivering quality products made to your exact specifications.
Why Use Hammond Manufacturing?
  • Hammond offers a wide selection and massive inventory ready to be modified.
  • Typically, the minimum order is 25 units. This can vary depending on the product and services required.
  • Hammond has an experience enclosure modification team and two dedicated modification facilities located in North America and Europe. We are knowledgeable, available, and capable.
  • Hammond helps eliminate scrap and design errors with approval drawings to confirm correct interpretation of your design requirements. Many orders will also include fast delivery of sample enclosures for inspection. These steps ensure that your assembly fits perfectly before heading to the production stage.
Popular Modification Services Offered
  • Holes.
  • Cutouts.
  • Tapping and Countersinking.
  • Pressed-in hardware (studs, standoffs).
  • Silk Screening.
  • UV Printing.
  • Special colours.
  • Special length extrusions.
  • Pre-Installed Accessories.
  • Available services vary by product.
Customisation Serices | Hammond Manufacturing | KGA Enclosures Ltd

1485 Series | Hammond Manufacturing Electrical Enclosures | Enclosures - Racks - Transformers - Components