Credit Cards and PayPal Payments Accepted
KGA Enclosures Ltd - Enclosures For Electronics
Tel: +44 (0)1535 636856
E-Mail: sales@kgaenclosures.com
UnioBox 3 Extruded Aluminium Enclosures and Product Accessories
UnioBox 3 Extruded Aluminium Enclosures

The UnioBox Extruded Aluminium Enclosures are manufactured and customised by Lincoln Binns Ltd in the United Kingdom. The UnioBox Enclosure range is distributed by KGA Enclosures on behalf of Lincoln Binns. The UnioBox 3 Enclosures are available in standard extrusion lengths of 80mm, 120mm, 160mm and 220mm with custom extrusion lengths available upon request. The standard widths include 104mm, 132mm, 164mm and 224mm, with this range custom widths are available upon request. The height (120mm) is fixed for the this range of enclosures. Anodised colour options include, black and silver. Silver is available to be purchased individually, whilst black and any custom colour required are all supplied with a minimum order quantity of 10 pieces, the same order quantities also applies to the aluminium end plates. The extrusions are supplied with 2 End Plates, 1 Top and 1 Bottom Belly Plate and 8 Assembly Screws, however these can be ordered individually if end plates are not required. A large range of product accessories are available more information on all accessories can be found below. Don't forget all products are available with full customisation options.

The UnioBox 3 Extrusions can house a 220mm wide circuit board, due to 2mm being required on each side of the circuit board required for mounting the boards into the extrusion. The length of circuit can board can be anything up to 220mm for this series, please remember custom extrusion lengths and widths are available. The circuit boards are able to have a maximum component height of 95mm. Carrier plates are available, we offer both standard or customised carrier plates all with a minimum order quantity of one piece, carrier places are only available in a rough silver aluminium finish.

This extrusion is manufactured in Aluminium 6063 T6 (HE9). Silver anodised 5μm or black anodised 15μm to BS1615. The end plates and top / bottom belly plates are manufactured in Aluminium 5251 H22 sheet 1.5mm thick clear anodised 5μm or black anodised 15μm. The end plates and belly plates are available in two finished black anodised or silver anodised.

The UnioBox Enclosures have top and bottom belly plates which slide on and off allowing the end user / manufacturing easier access to the component inside the extrusion. The top and bottom plates are secured into place once the end plates are re-secured to the extrusion, meaning only one end plate has to be removed for access to the components inside of the enclosures. Custom extrusion length are available, and with the top and bottom belly plates both removable we can also offer customs widths, simply by cutting the belly plates to the required width and length. Fore more information on this option please contact us.

Product accessories for the UnioBox Enclosures include self tapping, these need to be ordered separately if required. We recommend silver screws for silver and blue enclosures, and black screws for black and red enclosures. Aluminium and Acrylic end plates are available for each enclosure, the se again need to be ordered separately from the extrusion, The aluminium end plates are available in 4 standard colour options include black, blue, red and silver, minimum order quantities applies for blue, red and any custom colour required of 10 pieces. Acrylic end plates are also available, these are available in 3 standard colour options of black, clear and smoke, these are all sold individually, while any custom colour have a minimum order quantity of 10 pieces. Acrylic end plates are ideal fro any RF / Wi-Fi project, due to the increase in signal strength being able to pass through acrylic, we still recommend an aerial for full signal coverage. Aluminium and Acrylic end plates are available with full customisation services. ABS mounting brackets are available, making it easy to secure the finished product to walls, bulkheads, doors and any other surfaces required. The ABS mounting brackets are available in 1 standard colour black, and in one standard length of 40mm, these are sold as a complete set. The ABS mounting bracket is installed onto the extrusion using a simple snap / clip on system, they are installed on the corner of the extrusion, once installed they remain in place, they are simply removed by snapping them off the extrusion. These are ideal for products where they will be constantly mounted and de-mounted during the products working life. Aluminium carrier plates are available, we can offer standard and customised carrier plates to ensure a safe and perfect fit for any circuit board size, when manufacturing customised carrier plates we do like to a have circuit board supplied to allow our team of engineer's to create the perfect carrier plates (Non-Disclosure Agreements can be signed if required). All carrier plates are available individually but are only available in a rough silver aluminium finish. Protective rubber feet complete the range, offering a little more protection when placed on surfaces. Rubber feet are available in either black or grey.

KGA Enclosures Ltd offers a full customisation service on both the extrusions and end plates (Aluminium and Acrylic Options). Milling, punching and stamping is all available for the addition of holes and slots to meet all requirements for connectors, Led's, antenna's and all other requirements. Printing, laser engraving and silk screening services are available, allowing for the addition of text and logo's, which will allow the end users to easily identify lights, switch's and cables. All customisation services are available at very competitive pricing and all with low minimum order quantities. To see how KGA Enclosures can assist you with any current or future projects simply email your technical drawings to sales@kgaenclosures.com or call +44 (0)1535 636856 for a free no obligations quote. Please note when products are customised payment terms differ from standard products.

  Range 1 - 4 PCB Dimensions  
  Product Series Max PCB Component Width Max PCB Component Height  
UnioBox 2 220mm 55mm
UnioBox 3 220mm 95mm
UnioBox 66 220mm 45mm
Custom Extrusion Widths and Lengths are available - 4mm needs to be added to circuit board width to calculate extrusion width.
  UnioBox Customisation Services  
  Customisation Services Extrusion All Plates  
Milled Holes Yes Yes
Punched Holes No Yes
Custom Colours Yes Yes
Printed Text Yes Yes
Other Options Custom Lengths and Widths Milled From Solid / Custom Lengths and Widths
Product Data Sheet
Custom Options Available
Contact Us For Availability
For More Information Click Part Number
Product Dimensions and Colour Options
Part No Colour Length Width Height 1+ 10+ 50+ 100+ 500+ Tech

Extrusion Width - 104mm

U3B-104x080 Black 80mm3.15" 104mm4.10" 120mm4.72" Call us Call us Call us Call us Call us  dxfe/plate 
U3S-104x080 Silver 80mm3.15" 104mm4.10" 120mm4.72" £10.71 £9.64 £9.11 £8.84 £8.57  dxfe/plate 
U3B-104x120 Black 120mm4.72" 104mm4.10" 120mm4.72" Call us Call us Call us Call us Call us  dxfe/plate 
U3S-104x120 Silver 120mm4.72" 104mm4.10" 120mm4.72" £13.45 £12.11 £11.44 £11.10 £10.76  dxfe/plate 
U3B-104x160 Black 160mm6.30" 104mm4.10" 120mm4.72" Call us Call us Call us Call us Call us  dxfe/plate 
U3S-104x160 Silver 160mm6.30" 104mm4.10" 120mm4.72" £16.40 £14.76 £13.94 £13.53 £13.12  dxfe/plate 
U3B-104x220 Black 220mm8.66" 104mm4.10" 120mm4.72" Call us Call us Call us Call us Call us  dxfe/plate 
U3S-104x220 Silver 220mm8.66" 104mm4.10" 120mm4.72" £21.35 £19.22 £18.15 £17.62 £17.08  dxfe/plate 

Extrusion Width - 132mm

U3B-132x080 Black 80mm3.15" 132mm5.20" 120mm4.72" Call us Call us Call us Call us Call us  dxfe/plate 
U3S-132x080 Silver 80mm3.15" 132mm5.20" 120mm4.72" £12.36 £11.12 £10.50 £10.19 £9.88  dxfe/plate 
U3B-132x120 Black 120mm4.72" 132mm5.20" 120mm4.72" Call us Call us Call us Call us Call us  dxfe/plate 
U3S-132x120 Silver 120mm4.72" 132mm5.20" 120mm4.72" £15.38 £13.85 £13.08 £12.69 £12.31  dxfe/plate 
U3B-132x160 Black 160mm6.30" 132mm5.20" 120mm4.72" Call us Call us Call us Call us Call us  dxfe/plate 
U3S-132x160 Silver 160mm6.30" 132mm5.20" 120mm4.72" £18.70 £16.83 £15.90 £15.43 £14.96  dxfe/plate 
U3B-132x220 Black 220mm8.66" 132mm5.20" 120mm4.72" Call us Call us Call us Call us Call us  dxfe/plate 
U3S-132x220 Silver 220mm8.66" 132mm5.20" 120mm4.72" £24.28 £21.86 £20.64 £20.03 £19.43  dxfe/plate 

Extrusion Width - 164mm

U3B-164x080 Black 80mm3.15" 164mm6.46" 120mm4.72" Call us Call us Call us Call us Call us  dxfe/plate 
U3S-164x080 Silver 80mm3.15" 164mm6.46" 120mm4.72" £14.84 £13.36 £12.61 £12.24 £11.87  dxfe/plate 
U3B-164x120 Black 120mm4.72" 164mm6.46" 120mm4.72" Call us Call us Call us Call us Call us  dxfe/plate 
U3S-164x120 Silver 120mm4.72" 164mm6.46" 120mm4.72" £18.21 £16.39 £15.48 £15.02 £14.56  dxfe/plate 
U3B-164x160 Black 160mm6.30" 164mm6.46" 120mm4.72" Call us Call us Call us Call us Call us  dxfe/plate 
U3S-164x160 Silver 160mm6.30" 164mm6.46" 120mm4.72" £21.93 £19.74 £18.64 £18.09 £17.54  dxfe/plate 
U3B-164x220 Black 220mm8.66" 164mm6.46" 120mm4.72" Call us Call us Call us Call us Call us  dxfe/plate 
U3S-164x220 Silver 220mm8.66" 164mm6.46" 120mm4.72" £28.48 £25.63 £24.21 £23.50 £22.79  dxfe/plate 

Extrusion Width - 224mm

U3B-224x080 Black 80mm3.15" 224mm8.82" 120mm4.72" Call us Call us Call us Call us Call us  dxfe/plate 
U3S-224x080 Silver 80mm3.15" 224mm8.82" 120mm4.72" £17.84 £16.06 £15.16 £14.72 £14.27  dxfe/plate 
U3B-224x120 Black 120mm4.72" 224mm8.82" 120mm4.72" Call us Call us Call us Call us Call us  dxfe/plate 
U3S-224x120 Silver 120mm4.72" 224mm8.82" 120mm4.72" £21.83 £19.65 £18.56 £18.01 £17.46  dxfe/plate 
U3B-224x160 Black 160mm6.30" 224mm8.82" 120mm4.72" Call us Call us Call us Call us Call us  dxfe/plate 
U3S-224x160 Silver 160mm6.30" 224mm8.82" 120mm4.72" £26.32 £23.69 £22.38 £21.72 £21.06  dxfe/plate 
Product Accessories
Assembly Screws
Part No Colour Contents Assembly Screw Type 1+ 10+ 50+ 100+ 500+
SC8U Silver Pack of 8 No6 Self Tapping Screws, Torx Head £0.43 £0.38 £0.36 £0.35 £0.34
SCB8U Black Pack of 8 No6 Self Tapping Screws, Torx Head £0.57 £0.51 £0.49 £0.47 £0.46
SC200U Silver Pack of 200 No6 Self Tapping Screws, Torx Head £6.30 £5.67 £5.36 £5.20 £5.04
SCB200U Black Pack of 200 No6 Self Tapping Screws, Torx Head £10.05 £9.04 £8.54 £8.29 £8.04
SC200UAT Silver Pack of 200 No6 Self Tapping Screws, Anti-Tamper Torx Head £6.30 £5.67 £5.36 £5.20 £5.04
SCB200UAT Black Pack of 200 No6 Self Tapping Screws, Anti-Tamper Torx Head £10.72 £9.65 £9.11 £8.85 £8.58
Mounting Lugs (ABS Plastic)
Part No Colour Contents Material Length 1+ 10+ 50+ 100+ 500+
UBL-50 Black 1 Bracket with 2 ABS 40mm1.57" £0.70 £0.63 £0.59 £0.57 £0.56
Din Rail Brackets / Clips
Part No Colour Contents Length Width Height 1+ 10+ 50+ 100+ 500+ Tech
1427DINCLIP Black Pack of 2 46mm1.81" 10mm0.39" 15mm0.59" £3.04 £2.88 £2.81 £2.73 £2.58 dxf pdfstp 
1427DIN42M Silver Individual 42mm1.65" 8mm0.31" 51mm2.02" £6.14 £5.83 £5.68 £5.52 £5.22 dxf pdfstp 
1427DIN75M Silver Individual 75mm2.95" 8mm0.31" 51mm2.02" £7.18 £6.82 £6.64 £6.46 £6.10 dxf pdfstp 
1427DIN100M Silver Individual 100mm3.94" 8mm0.31" 51mm2.02" £7.44 £7.07 £6.88 £6.70 £6.33 dxf pdfstp 
Carrier Plates (Aluminium)
Part No Colour Contents Length Width Height 1+ 10+ 50+ 100+ 500+

To be used with Extrusion Width - 104mm

CN-100080 Silver Individual 80mm3.15" 100mm3.94" 1.5mm0.06" Call us Call us Call us Call us Call us
CN-100120 Silver Individual 120mm4.72" 100mm3.94" 1.5mm0.06" Call us Call us Call us Call us Call us
CN-100160 Silver Individual 160mm6.30" 100mm3.94" 1.5mm0.06" Call us Call us Call us Call us Call us
CN-100220 Silver Individual 220mm8.66" 100mm3.94" 1.5mm0.06" Call us Call us Call us Call us Call us

To be used with Extrusion Width - 132mm

CN-128080 Silver Individual 80mm3.15" 128mm5.04" 1.5mm0.06" Call us Call us Call us Call us Call us
CN-128120 Silver Individual 120mm4.72" 128mm5.04" 1.5mm0.06" Call us Call us Call us Call us Call us
CN-128160 Silver Individual 160mm6.30" 128mm5.04" 1.5mm0.06" Call us Call us Call us Call us Call us
CN-128220 Silver Individual 220mm8.66" 128mm5.04" 1.5mm0.06" Call us Call us Call us Call us Call us

To be used with Extrusion Width - 164mm

CN-160080 Silver Individual 80mm3.15" 160mm6.30" 1.5mm0.06" Call us Call us Call us Call us Call us
CN-160120 Silver Individual 120mm4.72" 160mm6.30" 1.5mm0.06" Call us Call us Call us Call us Call us
CN-160160 Silver Individual 160mm6.30" 160mm6.30" 1.5mm0.06" Call us Call us Call us Call us Call us
CN-160220 * Silver Individual 220mm8.66" 160mm6.30" 1.5mm0.06" Call us Call us Call us Call us Call us

To be used with Extrusion Width - 224mm

CN-220080 Silver Individual 80mm3.15" 220mm8.66" 1.5mm0.06" Call us Call us Call us Call us Call us
CN-220120 Silver Individual 120mm4.72" 220mm8.66" 1.5mm0.06" Call us Call us Call us Call us Call us

* CN160220 Can be used lengthways or width ways

Protective Rubber Feet
Part No Colour Contents Material Diameter Height 1+ 10+ 50+ 100+ 500+
KGA-PF-GRY Grey Bag of 4 Polyurethane / Rubber 9.6mm0.38" 5.5mm0.22" £0.99 £0.89 £0.84 £0.82 £0.79
KGA-PF-BK Black Bag of 4 Polyurethane / Rubber 14mm0.55" 4.5mm0.18" £0.99 £0.89 £0.84 £0.82 £0.79
Related Products