1557 Series Enclosures - KGA Enclosures Ltd

1557 Series Type 4/4X, 6/6P Polycarbonate and ABS Plastic Enclosures

Product Features
Ideally suited for mounting printed circuit boards. Can be used in a tabletop configuration or two different wall-mount configurations. Rounded corners and face provide a more modern look while still offering superior water-tight ratings. Available in black or grey ABS plastic or UL listed polycarbonate. ABS versions are moulded from general purpose material which carries a flammability rating of UL94-HB. For indoor use. Polycarbonate versions are UV stabilized for outdoor use and carry a UL94-5VA flammability rating. For indoor or outdoor use. Polycarbonate versions are cUL and UL 508A listed (File #E65324), NEMA 4, 4X, 6, 6P. ABS plastic versions are not UL listed. Gasketed lid with two piece "tongue and groove" construction provides protection against access of oil, dust and water. Gasket is one piece made from high temperature, U.L. listed silicone. ABS versions are designed to meet IP66. Polycarbonate versions are designed to meet IP68. Lid is secured with included M4 stainless steel machine screws which are threaded into corrosion resistant bushings for repetitive assembly and disassembly. All hardware is designed to avoid corrosion caused by harsh environments over time.

Product Features

Ideally suited for mounting printed circuit boards.

Can be used in a tabletop configuration or two different wall-mount configurations.

Rounded corners and face provide a more modern look while still offering superior water-tight ratings.

Available in black or grey ABS plastic or UL listed polycarbonate.

ABS versions are moulded from general purpose material which carries a flammability rating of UL94-HB. For indoor use.

Polycarbonate versions are UV stabilized for outdoor use and carry a UL94-5VA flammability rating. For indoor or outdoor use.

Polycarbonate versions are cUL and UL 508A listed (File #E65324), NEMA 4, 4X, 6, 6P. ABS plastic versions are not UL listed.

Gasketed lid with two piece "tongue and groove" construction provides protection against access of oil, dust and water.

Gasket is one piece made from high temperature, U.L. listed silicone.

ABS versions are designed to meet IP66.

Polycarbonate versions are designed to meet IP68.

Lid is secured with included M4 stainless steel machine screws which are threaded into corrosion resistant bushings for repetitive assembly and disassembly. All hardware is designed to avoid corrosion caused by harsh environments over time.

View Product Data Sheet - Click here for more information.
Full customisation services - Click here for more information.

KGA Enclosures Ltd are full authorised distributors of the Hammond Manufacturing product range, this includes the full Enclosure, Transformer and Rack Systems product ranges. All Hammond's enclosures and product accessories are available from KGA Enclosures Ltd to view the product range (Click Here) or to view the product price list (Click Here).

If you have any questions regarding any product or would like to inquiry about stock availability, pricing and customisation options, simply call +44 (0)1535 636856 or E-Mail sales@kgaenclosures.com, where we will be happy to assist you.

1557 Series Enclosures - Hammond Manufacturing Enclosures Enclosures

1557 Series Enclosures Product Options

Part No	Colour	Length	Width	Height	1+	10+	25+	More
ABS
1557BABK	Black	80mm3.15"	80mm3.15"	60mm2.36"	£8.72	£8.02	£7.85	More....
1557BAGY	Light Grey	80mm3.15"	80mm3.15"	60mm2.36"	£8.72	£8.02	£7.85	More....
1557BBK	Black	80mm3.15"	80mm3.15"	45mm1.77"	£8.52	£7.84	£7.67	More....
1557BGY	Light Grey	80mm3.15"	80mm3.15"	45mm1.77"	£8.52	£7.84	£7.67	More....
1557DABK	Black	120mm4.72"	120mm4.72"	70mm2.76"	£13.04	£12.00	£11.74	More....
1557DAGY	Light Grey	120mm4.72"	120mm4.72"	70mm2.76"	£13.04	£12.00	£11.74	More....
1557DBK	Black	120mm4.72"	120mm4.72"	45mm1.77"	£9.95	£9.15	£8.95	More....
1557DGY	Light Grey	120mm4.72"	120mm4.72"	45mm1.77"	£9.95	£9.15	£8.95	More....
1557FABK	Black	160mm6.30"	160mm6.30"	70mm2.76"	£18.54	£17.06	£16.69	More....
1557FAGY	Light Grey	160mm6.30"	160mm6.30"	70mm2.76"	£18.54	£17.06	£16.69	More....
1557FBK	Black	160mm6.30"	160mm6.30"	45mm1.77"	£13.73	£12.63	£12.36	More....
1557FGY	Light Grey	160mm6.30"	160mm6.30"	45mm1.77"	£13.73	£12.63	£12.36	More....
1557HABK	Black	200mm7.87"	200mm7.87"	70mm2.76"	£19.23	£17.69	£17.31	More....
1557HAGY	Light Grey	200mm7.87"	200mm7.87"	70mm2.76"	£19.23	£17.69	£17.31	More....
1557HBK	Black	200mm7.87"	200mm7.87"	45mm1.77"	£18.54	£17.06	£16.69	More....
1557HGY	Light Grey	200mm7.87"	200mm7.87"	45mm1.77"	£18.54	£17.06	£16.69	More....
Polycarbonate (Not UL Listed)
1557B2BK	Black	80mm3.15"	80mm3.15"	45mm1.77"	£11.27	£10.37	£10.15	More....
1557B2GY	Grey	80mm3.15"	80mm3.15"	45mm1.77"	£11.27	£10.37	£10.15	More....
1557BA2BK	Black	80mm3.15"	80mm3.15"	60mm2.36"	£11.67	£10.74	£10.50	More....
1557BA2GY	Grey	80mm3.15"	80mm3.15"	60mm2.36"	£11.67	£10.74	£10.50	More....
1557D2BK	Black	120mm4.72"	120mm4.72"	45mm1.77"	£13.04	£12.00	£11.74	More....
1557D2GY	Grey	120mm4.72"	120mm4.72"	45mm1.77"	£13.04	£12.00	£11.74	More....
1557DA2BK	Black	120mm4.72"	120mm4.72"	70mm2.76"	£15.11	£13.90	£13.60	More....
1557DA2GY	Grey	120mm4.72"	120mm4.72"	70mm2.76"	£15.11	£13.90	£13.60	More....
1557F2BK	Black	160mm6.30"	160mm6.30"	45mm1.77"	£18.54	£17.06	£16.69	More....
1557F2GY	Grey	160mm6.30"	160mm6.30"	45mm1.77"	£18.54	£17.06	£16.69	More....
1557FA2BK	Black	160mm6.30"	160mm6.30"	70mm2.76"	£23.36	£21.49	£21.02	More....
1557FA2GY	Grey	160mm6.30"	160mm6.30"	70mm2.76"	£23.36	£21.49	£21.02	More....
1557H2BK	Black	200mm7.87"	200mm7.87"	45mm1.77"	£26.08	£24.00	£23.47	More....
1557H2GY	Grey	200mm7.87"	200mm7.87"	45mm1.77"	£26.08	£24.00	£23.47	More....
1557HA2BK	Black	200mm7.87"	200mm7.87"	70mm2.76"	£23.36	£21.49	£21.02	More....
1557HA2GY	Grey	200mm7.87"	200mm7.87"	70mm2.76"	£23.36	£21.49	£21.02	More....

1557 Series Enclosures Product Accessories

Assembly Screws

Part No	Colour	Contents	Screw Information	1+	10+	25+	More
SC526-50	Silver	Pack of 50	P.C. Board Screws	£3.61	£3.32	£3.25	More....
SC576-50	Silver	Pack of 50	Replacement Lid Screws	£5.04	£4.64	£4.54	More....

Sealing Kits

Part No	Colour	Length	Width	Height	1+	10+	25+	More
1557BGASKET	Clear	80mm3.15"	80mm3.15"	1mm0.04"	£3.86	£3.55	£3.47	More....
1557DGASKET	Clear	120mm4.72"	120mm4.72"	1mm0.04"	£3.86	£3.55	£3.47	More....
1557FGASKET	Clear	160mm6.30"	160mm6.30"	1mm0.04"	£7.56	£6.96	£6.81	More....
1557HGASKET	Clear	220mm7.78"	220mm7.78"	1mm0.04"	£7.66	£7.05	£6.89	More....
For compatibility please view product data sheet

Wall Mounting Brackets Kits

Part No	Colour	Contents	Material	1+	10+	25+	More
1557FOOT2BK-24	Black	Pack of 24	Polycarbonate	£8.18	£7.52	£7.36	More....
1557FOOT2GY-24	Light Grey	Pack of 24	Polycarbonate	£8.43	£7.76	£7.59	More....
1557FOOTBK-24	Black	Pack of 24	ABS Plastic	£7.60	£6.99	£6.84	More....
1557FOOTGY-24	Light Grey	Pack of 24	ABS Plastic	£7.66	£7.05	£6.89	More....
For compatibility please view product data sheet

Protective Rubber Feet

Part No	Colour	Length	Width	Height	1+	10+	25+	More
1421T6CL	Clear	n/an/a	7.9mm0.31"	2.2mm0.09"	£1.90	£1.75	£1.71	More....
Click Here For More Information

Hammond Manufacturing Customisation Services

Modified Electronic Enclosures
Almost every enclosure will need some kind of modification to be useful. In house modifications can be tedious, over complicated and a distraction from your main core business. A third party shop can add time and expense. Let us help you to deliver quality products made to your exact specifications.

Why choose Hammond Manufacturing to modify your enclosure
Hammond Manufacturing offers a wide selection and massive inventory of enclosures ready to be modified. Typically the minimum order quantity is 25 pieces. This can vary depending on product and service required. Please note KGA Enclosures does not add on any charges. Hammond has an experience enclosure modification team and two dedicated modification facilities in North America and the United Kingdom. They are knowledgeable, available and capable. Hammond Manufacturing helps eliminate scrap and design errors with approval drawings to confirm correct interpretation of your deign required. Many orders will also include a fast delivery of sample enclosures for your inspection. These steps ensure that your assembly fits perfectly before heading into the mass production stage.

Why choose Hammond Manufacturing to modify your enclosure

Hammond Manufacturing offers a wide selection and massive inventory of enclosures ready to be modified.
Typically the minimum order quantity is 25 pieces. This can vary depending on product and service required. Please note KGA Enclosures does not add on any charges.
Hammond has an experience enclosure modification team and two dedicated modification facilities in North America and the United Kingdom. They are knowledgeable, available and capable.
Hammond Manufacturing helps eliminate scrap and design errors with approval drawings to confirm correct interpretation of your deign required. Many orders will also include a fast delivery of sample enclosures for your inspection. These steps ensure that your assembly fits perfectly before heading into the mass production stage.

Popular modification services offered:
Holes Cutouts Tapping and countersinking. Pressed-in hardware (Studs, Standoffs) Silk screening UV Printing Special colours Special length extrusions Pre-Installed accessories Available services vary by product


VAT No: GB 204612745
Business No: 09341700

1557 Series Enclosures - Hammond Manufacturing Enclosures