Great Brands - Great Prices - Great Service
World Wide Shipping on all Products
Credit Cards / PayPal Accepted
KGA Enclosures Ltd - Enclosures - Transformers - Components
Tel: +44 (0)1535 636856
E-Mail: sales@kgaenclosures.com
HWM Series Swing-Out Sectional Wall Mount Rack Cabinet
The Hammond Wall Mount (HWM) cabinet was designed with the technical professional in mind. The modern design enables the cabinet to be installed in less time and using fewer installer than similar cabinets of its size. Fabricated from heavy duty steel, the HWM is available in up to 32U, 31.7" overall depth and can supported up to 350lbs of equipment. The HWM is guaranteed not to drop down when the center section is opened. Similar products from other suppliers can drop down when the center section is opened which can result in costly equipment failures due to damages to storage devices. The HWM design prevents the center section from dropping saving you time and money from equipment replacement.

The vented from door and side plates were specifically designed for high capacity servers, switches and power management devices. Optional locking solid doors are available for all sizes.

Product Features
• Available in two (2) depths and four (4) heights.
• All sizes include either vented 63% perforated front door or smoked window front door.
• Center section features:
     • Heavy duty spring-hinge pin for easy installation and removal.
     • Sides that include two (2) vents and fan grills.
     • Can be installed to swing from left-to-right or right-to-left.
• Rear section features:
     • The side of the rear section includes 2.50" and 2.00" knockouts.
     • The top and bottom of the rear section includes 3.00", 2.00", 1.38" and 1.12" knockouts.
     • Generous cable management lances located on the rear section as well as on mounting rails.
     • Mounting points for outlet strips.
     • Heavy duty keyhole for wall mounting.
     • Large opening in rear for cable access.
• Front locking door and center section keyed the same (optional key available).

Product Specifications
• 14-gauge welded rear section; 16-gauge center section and doors.
• EIA compliant adjustable depth mounting rails.
• Includes one (1) pair of tapped (10-32) mounting rails.
     • Supports multiple pairs of rails in both tapped and square hole options.
     • Starter pack of SCREW1032-50 screws.
• Grounding lugs located on top and bottom of the door, center and rear sections.
• UL Listed 2416 load rated for up to 350lbd (158kg). Static load tested to 1,400lbs (635kg).
• Rugged sand-textured black powder paint which reduces the look of fingerprints and marks.
• TAA compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America.

• View Product Data Sheet - Click here for more information.
• Full customisation services - Click here for more information.

HWM Series Cabinet - Hammond Manufacturing Rack Systems

KGA Enclosures Ltd are full authorised distributors of the Hammond Manufacturing product range, this includes the full Enclosure, Transformer and Rack Systems product ranges. All Hammond's Rack Systems and product accessories are available from KGA Enclosures Ltd to view the product range (Click Here) or to view the product price list (Click Here).

If you have any questions regarding any product or would like to inquiry about stock availability, pricing and customisation options, simply call +44 (0)1535 636856 or E-Mail sales@kgaenclosures.com, where we will be happy to assist you.

HWM Series Cabinet Product Options
Part No Overall Height Overall Width Overall Depth Rack Units 1+ 10+ 50+
Vented Door
HWM2412U20BK 27.75" 24.68" 25.70" 12U POA POA POA More....
HWM2412U26BK 27.75" 24.68" 31.70" 12U POA POA POA More....
HWM2420U11BK 41.75" 24.68" 16.70" 20U POA POA POA More....
HWM2420U20BK 41.75" 24.68" 25.70" 20U POA POA POA More....
HWM2420U26BK 41.75" 24.68" 31.70" 20U POA POA POA More....
HWM2424U11BK 48.75" 24.68" 16.70" 24U POA POA POA More....
HWM2424U20BK 48.75" 24.68" 25.70" 24U POA POA POA More....
HWM2424U26BK 48.75" 24.68" 31.70" 24U POA POA POA More....
HWM2432U11BK 62.75" 24.68" 16.70" 32U POA POA POA More....
HWM2432U20BK 62.75" 24.68" 25.70" 32U POA POA POA More....
HWM2432U26BK 62.75" 24.68" 31.70" 32U POA POA POA More....
Window Door
HWM2412U20WDBK 27.75" 24.68" 25.70" 12U POA POA POA More....
HWM2412U26WDBK 27.75" 24.68" 31.70" 12U POA POA POA More....
HWM2420U20WDBK 41.75" 24.68" 25.70" 20U POA POA POA More....
HWM2420U26WDBK 41.75" 24.68" 31.70" 20U POA POA POA More....
HWM2424U20WDBK 48.75" 24.68" 25.70" 24U POA POA POA More....
HWM2424U26WDBK 48.75" 24.68" 31.70" 24U POA POA POA More....
HWM2432U20WDBK 62.75" 24.68" 25.70" 32U POA POA POA More....
HWM2432U26WDBK 62.75" 24.68" 31.70" 32U POA POA POA More....
For more detailed information please click part number
Hammond Customisation Services
Modified Electronic Enclosures
Almost every enclosure will need some kind of modification to be useful. In house modifications can be tedious, over complicated and a distraction from your main core business. A third party shop can add time and expense. Let us help you to deliver quality products made to your exact specifications.
Hammond Customisation Services

Why choose Hammond Manufacturing to modify your enclosure
• Hammond Manufacturing offers a wide selection and massive inventory of enclosures ready to be modified.
• Typically the minimum order quantity is 25 pieces. This can vary depending on product and service required. Please note KGA Enclosures does not add on any charges.
• Hammond has an experience enclosure modification team and two dedicated modification facilities in North America and the United Kingdom. They are knowledgeable, available and capable.
• Hammond Manufacturing helps eliminate scrap and design errors with approval drawings to confirm correct interpretation of your design required. Many orders will also include a fast delivery of sample enclosures for your inspection. These steps ensure that your assembly fits perfectly before heading into the mass production stage.

Popular modifications offered
• Holes.
• Cutouts.
• Tapping and countersinking.
• Pressed-in hardware (Studs, Standoffs).
• Silk screening.
• UV Printing.
• Special colours.
• Special length extrusions.
• Pre-Installed accessories.
• Available services vary by product.
Contact Details
Call Us +44 (0)1535 636856
E-Mail Us sales@kgaenclosures.com
Home www.kgaenclosures.com
Now Available - The Deltron and Roxburgh Components Product Ranges
Follow us on Facebook Follow us on Instagram Follow us on LinkedIn Follow us on Twitter
Vat No: GB 204612745
Business No: 09341700